FTDI FT2232H USB to UART/MPSSE/JTAG Breakout Board

Developing ESP32 code by iteratively downloading code to your target via esptool can become laborious for anything but the smallest of projects. In addition to the UART Bootloader, the ESP32 can also be programmed and debugged via the JTAG interface. Debugging allows single stepping through your code, adding breakpoints and …

After 18 months developing with the Zephyr RTOS, I’m starting to become a strong proponent. In my opinion, one of the key advantages of the Zephyr RTOS is the hardware abstraction. It allows applications to be written for Zephyr that are platform independent and can be moved between different boards …

The Atten ATZ97 / Maynuo M97 Series programmable DC loads has a RS-232 port that can be used for instrument control and acquisition. Rather than using more conventional text based SCPI (Standard Commands for Programmable Instruments) commands, these instruments use Modbus, a protocol designed for PLCs (Programmable Logic Controllers). The …